Summary for Test 2024-08-29-52-2
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 1000089 DEA: 024J8904 EFIS: 0223000084 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-6.0/R12.6 |
| Award Date | 04/04/2024 |
| Closeout Date | 01/24/2025 |
| Work Description | RHMA (GAP GRADED) OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TEHAMA COUNTY NEAR PLATINA FROM 3.3 MILES WEST OF VESTAL ROAD TO 2.3 MILES EAST OF DRY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 08/29/2024 | Sample Unique Key | 52 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/03/2024 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2" RHMA-G PG64-16 |
| The quantity of what the sample constitutes | 16 Boxes 1/2" RHMA-G | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Josh | Last name of sampler or witnessed by | Williams |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | D79700 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Knife River Construction | Transportation Laboratory (TL) Number | 858132 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2024-08-29-52
DIME Test ID: 2024-08-29-52-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2024-09-17
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Colt Sweeny
Date of test: 09/17/2024
Mass of the dry specimen in air: 4571.2 g
Mass of the dry specimen plus paraffin coating in air: 4614.8 g
Mass of the dry specimen plus paraffin coating in water: 2607.5 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4573.0 g
Mass 2 of the dry specimen plus paraffin coating in air: 4620.5 g
Mass 2 of the dry specimen plus paraffin coating in water: 2603.6 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4573.1 g
Mass 3 of the dry specimen plus paraffin coating in air: 4620.5 g
Mass 3 of the dry specimen plus paraffin coating in water: 2605.4 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.334
Bulk Specific Gravity 2: 2.328
Bulk Specific Gravity 3: 2.330
Average Bulk Specific Gravity: 2.331
General comments (publicly viewable) (Max 1000 characters): Gmb=2.331
Test was verified on 9/17/2024 ✔
