Summary for Test 2024-09-11-20-2
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 1000165 DEA: 09392504 EFIS: 0923000029 |
|---|---|
| DIST-CO-RTE-PM | 09-INY-395-R17.2/25.8 |
| Award Date | 06/26/2024 |
| Closeout Date | 12/02/2024 |
| Work Description | HOT MIX ASPHALT (TYPE A), SHOULDER BACKING, & STRIPING. |
| Location Description | INYO COUNTY ABOUT 9 MILES SOUTH OF OLANCHA FROM 0.8 MILE SOUTH OF SYKES ROAD TO 0.3 MILE NORTH OF HAIWEE CANYON ROAD |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 09/11/2024 | Sample Unique Key | 20 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/11/2024 |
| Sample type | Acceptance | A brief description of the sample | 1/2” aggregate |
| The quantity of what the sample constitutes | 1 Bag of Coldfeed | From where was the sample collected | Source |
| First name of sampler or witnessed by | Dylan | Last name of sampler or witnessed by | Carapazza |
| Title of sampler | Consultant QA | Telephone number of sampler | |
| Laboratory sample identification | CF20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Granite Solari Plant | Transportation Laboratory (TL) Number | 4314 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Granite solari |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2” cold feed | The fabricator/manufacturer designation for the sample | |
| The plant number | A detailed description of where the material sample was collected | Belt device at plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2024-09-22: HMA Aggregates (Size 1/2"): Type A HMA - Continuous Mixing Plant - Sieve Analysis | 1 | 2024-09-11-20-2 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-09-11-20
DIME Test ID: 2024-09-11-20-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-09-13
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: Derek Carrington
Date of test: 09/13/2024
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 94.1 %
Cumulative percent passing the 3/8 in. sieve: 75.6 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 37 %
Cumulative percent passing the #16 sieve: 27.5 %
Cumulative percent passing the #30 sieve: 18.2 %
Cumulative percent passing the #50 sieve: 9.7 %
Cumulative percent passing the #100 sieve: 4.2 %
Cumulative percent passing the #200 sieve: 2.4 %
General comments (publicly viewable) (Max 1000 characters): CF-20 Agg
Test was verified on 9/13/2024 ✔