Summary for Test 2024-08-29-45-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 1000089 DEA: 024J8904 EFIS: 0223000084 |
---|---|
DIST-CO-RTE-PM | 02-TEH-36-6.0/R12.6 |
Award Date | 04/04/2024 |
Closeout Date | Not set |
Work Description | RHMA (GAP GRADED) OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING. |
Location Description | TEHAMA COUNTY NEAR PLATINA FROM 3.3 MILES WEST OF VESTAL ROAD TO 2.3 MILES EAST OF DRY CREEK BRIDGE |
QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
Sample Taken Date | 08/29/2024 | Sample Unique Key | 45 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/03/2024 |
Sample type | Production Start-Up | A brief description of the sample | 1/2" Coldfeed |
The quantity of what the sample constitutes | 2 Bags Coldfeed Aggregate | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Josh | Last name of sampler or witnessed by | Williams |
Title of sampler | Quality Control | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Knife River Construction | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0020 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
2024-09-29: HMA Aggregates (Size 1/2"): RHMA-G - Continuous Mixing Plant - Sieve Analysis | 1 | 2024-08-29-45-1 |
Test Details
DIME Sample ID: 2024-08-29-45
DIME Test ID: 2024-08-29-45-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-09-18
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 09/04/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1099.4 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
51.3 grams | 95 % | |||||
191.9 grams | 83 % | |||||
738.8 grams | 33 % | |||||
360.9 grams | ||||||
145.5 grams | 20 % | |||||
217.4 grams | 13 % | |||||
261.9 grams | 9 % | |||||
291.9 grams | 6 % | |||||
315.9 grams | 4 % | |||||
330.8 grams | 2.8 % | |||||
331.5 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/18/2024 ✔