Summary for Test 2024-08-15-81-3
Test performed: CTM 212-May 2010Project Information
| Project Identifiers | Project ID: 215676 DEA: 020J6404 EFIS: 0219000145 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-36-R13.6/R14.2 |
| Award Date | 12/19/2023 |
| Closeout Date | 09/24/2025 |
| Work Description | A13 AT ROUTE 36 SAFETY |
| Location Description | IN PLUMAS COUNTY NEAR CHESTER FROM 0.2 MILE WEST OF BAILEY CREEK BRIDGE TO 0.3 MILE EAST OF COUNTY ROAD A-13. |
| QA Service Level | 1 (Verified on 07/08/2021) |
Sample Information
| Sample Taken Date | 08/15/2024 | Sample Unique Key | 81 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/20/2024 | Sample type | Acceptance |
| A brief description of the sample | 3/4" Class II AB / Shoulder Backing | The quantity of what the sample constitutes | 3 Bags |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Monte |
| Last name of sampler or witnessed by | Spencer | Title of sampler | TET |
| Telephone number of sampler | Laboratory sample identification | D79692 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Round Mnt Rock | |
| Transportation Laboratory (TL) Number | 876995 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stock Pile at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-15-81
DIME Test ID: 2024-08-15-81-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2024-09-05
Test Results
Input Type: Measured
Tester's full name: Colt Sweeny
Date of test: 09/05/2024
Which procedure was used to fill the measure with aggregate?: no data
Weight of water in the measure: 21.06 lbm
Water temperature: 73 deg F
Tare weight of empty measure: 12.973 lbm
Weight of measure filled with aggregate (test 1): 48.369 lbm
Weight of measure filled with aggregate (test 2): 48.605 lbm
Weight of measure filled with aggregate (test 3): 48.535 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 35.4 lbm
Net weight of aggregate in measure (test 2): 35.63 lbm
Net weight of aggregate in measure (test 3): 35.56 lbm
Average net weight of aggregate required to fill the measure: 35.53 lbm
Aggregate unit weight: 105.07 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters): UW=105
Test was verified on 9/5/2024 ✔