Summary for Test 2024-08-19-67-2

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 1000001
DEA: 010H1704
EFIS: 0117000119
DIST-CO-RTE-PM01-MEN-101-R48.9/55.1
Award Date04/26/2024
Closeout DateNot set
Work DescriptionCOLD PLANE AC PAVEMENT AND PLACE HMA-A, RHMA-G, AND HFST.
Location DescriptionMENDOCINO COUNTY NEAR WILLITS FROM 0.6 MILE NORTH OF UPP CREEK BRIDGE TO 0.1 MILE SOUTH OF BIG TRAILS DRIVE
QA Service Level1 (Verified on 01/10/2024)

Sample Information

Sample Taken Date08/19/2024 Sample Unique Key67
Will the laboratory/organization for which you are a member perform testing on this material sample?No Date that the sample was received by the laboratory/organization performing the testing08/28/2024
Sample typeAcceptance A brief description of the sample1 can PG 58-22 binder
The quantity of what the sample constitutes1 can binder From where was the sample collectedSource
First name of sampler or witnessed byNone given Last name of sampler or witnessed byNone given
Title of sampler Telephone number of sampler
Laboratory sample identification24-169 Linked DIME Sample ID2024-08-19-33
The fabricator/manufacturer/facility nameGranite Ukiah Transportation Laboratory (TL) Number778437
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-22
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2024-08-19-67
DIME Test ID: 2024-08-19-67-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-09-06

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Hamidullah Barati
Date of test: 08/30/2024
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.357 kPa
Phase Angle (δ) (for the 10 cycles): 82.1 degree
Complex Modulus (G*) (for the 10 measurements): 3.550 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 3.58 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 9/6/2024