Summary for Test 2024-08-16-2-6
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 212720 DEA: 07291404 EFIS: 0712000094 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-1-55-58 |
| Award Date | 02/18/2021 |
| Closeout Date | Not set |
| Work Description | TRANCAS CREEK BRIDGE REPLACEMENT |
| Location Description | IN LOS ANGELES IN CITY OF MALIBU AT TRANCAS CREEK BRIDGE (53-0027). |
| QA Service Level | 1 (Verified on 04/02/2021) |
Sample Information
| Sample Taken Date | 08/16/2024 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/29/2024 |
| Sample type | Quality Assurance | A brief description of the sample | #9 HRC 500/510 Couplers |
| The quantity of what the sample constitutes | 168 Couplers | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Henry | Last name of sampler or witnessed by | Arredondo |
| Title of sampler | CALTRANS QA INSPECTOR | Telephone number of sampler | 5623329603 |
| Laboratory sample identification | TP-17-03 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Headed Reinforcement Corp, Fountain Valley, CA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L166-065-24 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | CMC Steel Arizona |
| Coupler Manufacturer | Headed Reinforcement Corporation Fountain Val | Intermediate Assembler or Fabricator | Salvador Lopez |
| Rebar Size | #9 | Coupler Model | HRC 500/510 |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | 79001741, 73131267, 79003949, 73130586 | Rebar Heat Number(s) | 6041939, 4128942, 9001247 |
| Rebar Size 2 | 9 | Coupler Unique ID | TP-17-03 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-16-2
DIME Test ID: 2024-08-16-2-6
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2024-09-03
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: aauvinen
Date of test: 08/30/2024
UTM: 400kip
Temperature: 72.00 f
Halo ID:
| Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | No. 9/29mm | 2 | 0 | 1 | 101965 | 101965 | Ok Necking - Ultimate | aauvinen |
General comments (publicly viewable) (Max 1000 characters): Ok Necking - Ultimate
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 9/3/2024 ✔