Summary for Test 2024-07-31-95-2
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 1000090 DEA: 024J9204 EFIS: 0223000087 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-299-61.0/64.0,70.0/72.2 |
| Award Date | 04/16/2024 |
| Closeout Date | 11/27/2024 |
| Work Description | ASPHALT RUBBER CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TRINITY COUNTY NEAR DOUGLAS CITY FROM STEEL BRIDGE ROAD TO 1.5 MILES WEST OF GRASS VALLEY CREEK BRIDGE NO 05-0013 AND FROM 2.6 MILES EAST OF TRINITY DAM BOULEVARD TO THE SHASTA COUNTY LINE |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 07/31/2024 | Sample Unique Key | 95 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/28/2024 | Sample type | Production Start-Up |
| A brief description of the sample | PG 58-22 Binder | The quantity of what the sample constitutes | 2 Cans |
| From where was the sample collected | Source | First name of sampler or witnessed by | C |
| Last name of sampler or witnessed by | Bryant | Title of sampler | TET |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Valero - Benicia | |
| Transportation Laboratory (TL) Number | 858013 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Tullis Northstate Asphalt | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
DIME Sample ID: 2024-07-31-95
DIME Test ID: 2024-07-31-95-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-08-30
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Hamidullah Barati
Date of test: 08/30/2024
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.248 kPa
Phase Angle (δ) (for the 10 cycles): 84.0 degree
Complex Modulus (G*) (for the 10 measurements): 2.052 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 2.06 kPa
General comments (publicly viewable) (Max 1000 characters): retest DSR OG
Test was verified on 8/30/2024 ✔
