Summary for Test 2024-08-19-65-1
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 1000003 DEA: 024J8404 EFIS: 0223000079 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-395-76.0/92.0 |
| Award Date | 04/24/2024 |
| Closeout Date | 06/16/2025 |
| Work Description | ASPHALT RUBBER CHIP SEAL AND REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | LASSEN COUNTY NEAR LITCHFIELD FROM 0.1 MILE SOUTH OF MAPES LANE TO 0.1 MILE NORTH OF KARLO ROAD |
| QA Service Level | 1 (Verified on 01/02/2024) |
Sample Information
| Sample Taken Date | 08/19/2024 | Sample Unique Key | 65 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/21/2024 |
| Sample type | Production Start-Up | A brief description of the sample | RAP |
| The quantity of what the sample constitutes | 2 Bags Coldfeed RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Derrick | Last name of sampler or witnessed by | Curry |
| Title of sampler | Curry Group | Telephone number of sampler | |
| Laboratory sample identification | D79694B | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | 858129 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Hat Creek Construction and Materials, Ward Lake Plant, Litchfield, CA |
|---|---|---|---|
| Aggregate Size | Aggregate Source | ||
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2024-09-7: HMA Aggregates (Size 1/2"): Sieve Analysis With RAP | 2 | 2024-08-19-65-1 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-19-65
DIME Test ID: 2024-08-19-65-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2024-09-05
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: Yes
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 08/28/2024
| Cumulative Mass Retained | Correction Factor | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 1571.2 grams | ||||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 13.2 grams | -0.2 % | 99 % | ||||
| 566.6 grams | 1.3 % | 65 % | ||||
| 894.0 grams | 2.8 % | 46 % | ||||
| 1088.1 grams | 3.2 % | 34 % | ||||
| 1211.3 grams | 2.3 % | 25 % | ||||
| 1300.9 grams | 1.3 % | 19 % | ||||
| 1367.8 grams | 0.8 % | 14 % | ||||
| 1412.7 grams | 0.4 % | 10.5 % | ||||
| 1414.4 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/5/2024 ✔