Summary for Test 2024-07-18-49-2
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 994889 DEA: 051M7304 EFIS: 0520000055 |
|---|---|
| DIST-CO-RTE-PM | 05-SCR-17-3.2/11.3 |
| Award Date | 08/14/2023 |
| Closeout Date | 09/02/2025 |
| Work Description | HIGH FRICTION SURFACE TREATMENT, COLD PLANE AND PLACE HMA. |
| Location Description | SANTA CRUZ COUNTY IN AND NEAR SCOTT VALLEY FROM SOUTH OF MT HERMON ROAD TO 0.6 MILE NORTH OF GLENWOOD DRIVE |
| QA Service Level | 1 (Verified on 07/24/2023) |
Sample Information
| Sample Taken Date | 07/18/2024 | Sample Unique Key | 49 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/19/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / HFST RESIN |
| The quantity of what the sample constitutes | 34 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000096KBP | Linked DIME Sample ID | 000096KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | High Friction Surface Treatment | Mgf. Lot Number(s) | AZ4G01045T |
|---|---|---|---|
| Batch Number | AZ4G01045T | Mix Number | AZ4G01045T |
| Resin Binder Type | Polyester | Used for Overlay | Yes |
| Used for Inlay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-07-18-49
DIME Test ID: 2024-07-18-49-2
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-08-27
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 07/25/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.137 in
Sample 1 Thickness: 0.491 in
Sample 1 Area: 0.0673 in^2
Sample 1 Ultimate Strength Actual: 255 lbs
Sample 1 percent elongation: 40 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.138 in
Sample 2 Thickness: 0.487 in
Sample 2 Area: 0.0672 in^2
Sample 2 Ultimate Strength Actual: 265 lbs
Sample 2 percent elongation: 43 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.15 in
Sample 3 Thickness: 0.487 in
Sample 3 Area: 0.0731 in^2
Sample 3 Ultimate Strength Actual: 292 lbs
Sample 3 percent elongation: 60 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.139 in
Sample 4 Thickness: 0.491 in
Sample 4 Area: 0.0682 in^2
Sample 4 Ultimate Strength Actual: 269 lbs
Sample 4 percent elongation: 47 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.147 in
Sample 5 Thickness: 0.485 in
Sample 5 Area: 0.0713 in^2
Sample 5 Ultimate Strength Actual: 288 lbs
Sample 5 percent elongation: 60 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.146 in
Sample 6 Thickness: 0.492 in
Sample 6 Area: 0.0718 in^2
Sample 6 Ultimate Strength Actual: 288 lbs
Sample 6 percent elongation: 52 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3789 psi
Sample 2 Ultimate strength : 3943.5 psi
Sample 3 Ultimate strength: 3994.5 psi
Sample 4 Ultimate strength: 3944.3 psi
Sample 5 Ultimate strength: 4039.3 psi
Sample 6 Ultimate strength : 4011.1 psi
Ultimate Strength Average: 3954 psi
Percent Elongation Average: 50 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 8/27/2024 ✔