Summary for Test 2024-08-07-65-2
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 994582 DEA: 073203U4 EFIS: 0722000071 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-91,605-R16.6/R16.8,R0.0/R10.4 |
| Award Date | 06/20/2023 |
| Closeout Date | Not set |
| Work Description | PLACE CONCRETE PAVEMENT AND HIGH FRICTION SURFACE TREATMENT. |
| Location Description | LOS ANGELES COUNTY ON ROUTE 605 FROM 0.2 MILE NORTH OF KATELLA AVENUE UNDECROSSING TO 0.1 MILE NORTH OF TELEGRAPH ROAD UNDERCROSSING AND ON ROUTE 91 FROM 0.4 MILE WEST OF ROUTE 605 UNDERCROSSING TO 0.2 MILE WEST OF ROUTE 605 UNDERCROSSING |
| QA Service Level | 1 (Verified on 07/12/2023) |
Sample Information
| Sample Taken Date | 08/07/2024 | Sample Unique Key | 65 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/08/2024 |
| Sample type | Per Request | A brief description of the sample | 1 gallon can / HFST RESIN |
| The quantity of what the sample constitutes | 23100 gallons | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Scott | Last name of sampler or witnessed by | Distefano |
| Title of sampler | Product Manager Resins | Telephone number of sampler | 1 201-577-6850 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Sika Corporation | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | High Friction Surface Treatment | Mgf. Lot Number(s) | A3008955935 B3008955954 |
|---|---|---|---|
| Batch Number | A3008955935 B3008955954 | Mix Number | A3008955935 B3008955954 |
| Resin Binder Type | Epoxy | Used for Overlay | Yes |
| Used for Inlay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-07-65
DIME Test ID: 2024-08-07-65-2
Testing Lab: Sika Corporation
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-08-27
Test Results
Number of specimens tested: 5
Input Type: Calculated
Tester's full name: Thao Vu
Date of test: 08/26/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.5 in
Sample 1 Thickness: 0.151 in
Sample 1 Area: 0.0755 in^2
Sample 1 Ultimate Strength Actual: 216 lbs
Sample 1 percent elongation: 32.5 %
Sample 1 Time: 1 MM:SS
Sample 2 Width: 0.5 in
Sample 2 Thickness: 0.146 in
Sample 2 Area: 0.073 in^2
Sample 2 Ultimate Strength Actual: 207 lbs
Sample 2 percent elongation: 37 %
Sample 2 Time: 1 MM:SS
Sample 3 Width: 0.5 in
Sample 3 Thickness: 0.14 in
Sample 3 Area: 0.07 in^2
Sample 3 Ultimate Strength Actual: 199 lbs
Sample 3 percent elongation: 34.5 %
Sample 3 Time: 1 MM:SS
Sample 4 Width: 0.5 in
Sample 4 Thickness: 0.133 in
Sample 4 Area: 0.0665 in^2
Sample 4 Ultimate Strength Actual: 197 lbs
Sample 4 percent elongation: 31.5 %
Sample 4 Time: 1 MM:SS
Sample 5 Width: 0.5 in
Sample 5 Thickness: 0.132 in
Sample 5 Area: 0.066 in^2
Sample 5 Ultimate Strength Actual: 195 lbs
Sample 5 percent elongation: 30.3 %
Sample 5 Time: 1 MM:SS
Sample 1 Ultimate strength: 2860 psi
Sample 2 Ultimate strength : 2840 psi
Sample 3 Ultimate strength: 2840 psi
Sample 4 Ultimate strength: 2960 psi
Sample 5 Ultimate strength: 2950 psi
Ultimate Strength Average: 2890 psi
Percent Elongation Average: 33.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/27/2024 ✔