Summary for Test 2024-08-01-75-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000204 DEA: 032G8004 EFIS: 0322000164 |
|---|---|
| DIST-CO-RTE-PM | 03-NEV,PLA-80-Var |
| Award Date | 05/30/2024 |
| Closeout Date | 05/27/2025 |
| Work Description | REMOVE, FURNISH, & PLACE POLYESTER CONCRETE OVERLAY. |
| Location Description | NEVADA AND PLACER COUNTIES AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 04/18/2024) |
Sample Information
| Sample Taken Date | 08/01/2024 | Sample Unique Key | 75 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/02/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000104KBP | Linked DIME Sample ID | 000104KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4G01129 |
|---|---|---|---|
| Batch number | AZ4G01129 | Mix number | AZ4G01129 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-01-75
DIME Test ID: 2024-08-01-75-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-08-22
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 08/22/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.485 in
Sample 1 Thickness: 0.272 in
Sample 1 Area: 0.1319 in^2
Sample 1 Ultimate Strength Actual: 411 lbs
Sample 1 percent elongation: 63 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.485 in
Sample 2 Thickness: 0.272 in
Sample 2 Area: 0.1319 in^2
Sample 2 Ultimate Strength Actual: 388 lbs
Sample 2 percent elongation: 57 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.485 in
Sample 3 Thickness: 0.247 in
Sample 3 Area: 0.1198 in^2
Sample 3 Ultimate Strength Actual: 382 lbs
Sample 3 percent elongation: 55 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.485 in
Sample 4 Thickness: 0.254 in
Sample 4 Area: 0.1232 in^2
Sample 4 Ultimate Strength Actual: 394 lbs
Sample 4 percent elongation: 64 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.484 in
Sample 5 Thickness: 0.257 in
Sample 5 Area: 0.1244 in^2
Sample 5 Ultimate Strength Actual: 402 lbs
Sample 5 percent elongation: 64 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.485 in
Sample 6 Thickness: 0.255 in
Sample 6 Area: 0.1237 in^2
Sample 6 Ultimate Strength Actual: 401 lbs
Sample 6 percent elongation: 59 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3116 psi
Sample 2 Ultimate strength : 2941.6 psi
Sample 3 Ultimate strength: 3188.6 psi
Sample 4 Ultimate strength: 3198.1 psi
Sample 5 Ultimate strength: 3231.5 psi
Sample 6 Ultimate strength : 3241.7 psi
Ultimate Strength Average: 3153 psi
Percent Elongation Average: 60 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 8/22/2024 ✔