Summary for Test 2024-08-14-9-3
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 994872 DEA: 060X1604 EFIS: 0618000183 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-58-R64.4/67.3 |
| Award Date | 08/29/2023 |
| Closeout Date | 05/09/2025 |
| Work Description | HMA (TYPE A), RHMA-G, JPCP, CRCP & HIGH SPEED WEIGH-IN-MOTION SYSTEM. |
| Location Description | KERN COUNTY NEAR EDISON FROM 0.2 MILE WEST OF TEJON HIGHWAY OVERCROSSING TO CALIENTE CREEK BRIDGE |
| QA Service Level | 1 (Verified on 06/14/2023) |
Sample Information
| Sample Taken Date | 08/14/2024 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/14/2024 |
| Sample type | Acceptance | A brief description of the sample | 3/4" RHMA -Gap Graded |
| The quantity of what the sample constitutes | L4SL4 | From where was the sample collected | Source |
| First name of sampler or witnessed by | Paul | Last name of sampler or witnessed by | Klinker |
| Title of sampler | Material Tester | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Griffith Edmonston | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 4 |
| Sublot number | 4 | HMA Mix Number | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2024-08-14-9
DIME Test ID: 2024-08-14-9-3
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2024-08-15
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 08/15/2024
Mass of the dry specimen in air: 975.1 g
Mass of the dry specimen plus paraffin coating in air: 986.1 g
Mass of the dry specimen plus paraffin coating in water: 553.7 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 1234.0 g
Mass 2 of the dry specimen plus paraffin coating in air: 1247.4 g
Mass 2 of the dry specimen plus paraffin coating in water: 710.3 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 1018.8 g
Mass 3 of the dry specimen plus paraffin coating in air: 1031.4 g
Mass 3 of the dry specimen plus paraffin coating in water: 577.0 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.321
Bulk Specific Gravity 2: 2.363
Bulk Specific Gravity 3: 2.313
Average Bulk Specific Gravity: 2.332
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-0X1604_37037_240814_L4SL4-5_T275 | 54.44 KB | 08/15/2024 | 2024-08-14-9-3 | Info |
Test was verified on 8/15/2024 ✔
