Summary for Test 2024-08-06-74-3
Test performed: AASHTO T59-22Project Information
| Project Identifiers | Project ID: 1000090 DEA: 024J9204 EFIS: 0223000087 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-299-61.0/64.0,70.0/72.2 |
| Award Date | 04/16/2024 |
| Closeout Date | 11/27/2024 |
| Work Description | ASPHALT RUBBER CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TRINITY COUNTY NEAR DOUGLAS CITY FROM STEEL BRIDGE ROAD TO 1.5 MILES WEST OF GRASS VALLEY CREEK BRIDGE NO 05-0013 AND FROM 2.6 MILES EAST OF TRINITY DAM BOULEVARD TO THE SHASTA COUNTY LINE |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 08/06/2024 | Sample Unique Key | 74 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/09/2024 |
| Sample type | Acceptance | A brief description of the sample | EMULSION |
| The quantity of what the sample constitutes | 1of1 | From where was the sample collected | Source |
| First name of sampler or witnessed by | C | Last name of sampler or witnessed by | B |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Albina - Klamath Falls, OR | Transportation Laboratory (TL) Number | C854551 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphaltic Emulsion | Emulsion Grade | CSS-1h |
|---|---|---|---|
| Lot Number | Not set | Sub Lot | Not set |
| Dilution Percentage Rate | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-08-06-74
DIME Test ID: 2024-08-06-74-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Test Release Date: 2024-08-15
Test Results
How many beakers will be used to conduct the test?: 4
Input Type: Measured
Tester's full name: Karen Sawyer
Date of test: 08/15/2024
Beaker 1 Mass of beaker, rod, screen (if used), and residue: 131.5 g
Beaker 1 Tare mass of the beaker, rod, and screen (if used): 114.7 g
Beaker 2 Mass of beaker, rod, screen (if used), and residue: 130.7 g
Beaker 2 Tare mass of the beaker, rod, and screen (if used): 113.9 g
Beaker 3 Mass of beaker, rod, screen (if used), and residue: 131.0 g
Beaker 3 Tare mass of the beaker, rod, and screen (if used): 114.0 g
Beaker 4 Mass of beaker, rod, screen (if used), and residue: 131.0 g
Beaker 4 Tare mass of the beaker, rod, and screen (if used): 114.1 g
Beaker 1 Residue: 33.6 %
Beaker 2 Residue: 33.6 %
Beaker 3 Residue: 34.0 %
Beaker 4 Residue: 33.8 %
Percentage of residue: 34 %
General comments (publicly viewable) (Max 1000 characters): 70/30 mix
Test was verified on 8/15/2024 ✔