Summary for Test 2024-07-31-45-3
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 1000090 DEA: 024J9204 EFIS: 0223000087 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-299-61.0/64.0,70.0/72.2 |
| Award Date | 04/16/2024 |
| Closeout Date | 11/27/2024 |
| Work Description | ASPHALT RUBBER CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TRINITY COUNTY NEAR DOUGLAS CITY FROM STEEL BRIDGE ROAD TO 1.5 MILES WEST OF GRASS VALLEY CREEK BRIDGE NO 05-0013 AND FROM 2.6 MILES EAST OF TRINITY DAM BOULEVARD TO THE SHASTA COUNTY LINE |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 07/31/2024 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/06/2024 |
| Sample type | Production Start-Up | A brief description of the sample | PG 58-22 Binder |
| The quantity of what the sample constitutes | 2 Cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | C | Last name of sampler or witnessed by | Bryant |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | 2024-07-31-79 | |
| The fabricator/manufacturer/facility name | Valero - Benicia | Transportation Laboratory (TL) Number | C858505 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Tullis Northstate Asphalt | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2024-07-31-45
DIME Test ID: 2024-07-31-45-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-08-21
Test Results
Phase: PAV residue
Input Type: Measured
Tester's full name: Hamidullah Barati
Date of test: 08/09/2024
Test Plate Diameter: 8 mm
Test Gap: 2 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 1.00 %
Stress Amplitude: 45.582 kPa
Phase Angle (δ) (for the 10 cycles): 46.9 degree
Complex Modulus (G*) (for the 10 measurements): 4535.349 kPa
Test Temperature (Specimen 1): 22.0 C
(G*) x sin(δ)=: 3312 kPa
General comments (publicly viewable) (Max 1000 characters): PAV
Test was verified on 8/21/2024 ✔
