Summary for Test 2024-06-20-123-5
Test performed: CTM 673-July 2012Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 06/20/2024 | Sample Unique Key | 123 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/26/2024 |
| Sample type | Quality Assurance | A brief description of the sample | 3.75" Joint Seal |
| The quantity of what the sample constitutes | 500' | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Watson Bowman Acme Corp | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0924258 |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman Acme Corp | Temperature | 72 |
| Humidity | 50 | Comments | |
| Joint Seal Size | 3.75 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-20-123
DIME Test ID: 2024-06-20-123-5
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2024-08-21
Test Results
Input Type: Measured
Tester's full name: aauvinen
Date of test: 08/07/2024
UTM: 56kip
Temperature: 72.00 f
Humidity: 50.00 %
Load at W1: no data
Width at 4 x Load at W1: no data
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.9215 in
Measured Minimum Uncompressed Width: 3.8445 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.855 in
Height of Contact Face: 3.6785 in
Length: 5 in
Spec Minimum Uncompressed Width: no data
Area (5 Times of the Height of Contact Face): 18.3925 sqin
Half of the Spec Minimum Uncompressed Width: no data
85 Percent of the Spec Minimum Uncompressed Width: 3.6785 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 0 in
W1 (Metric Units): 0 millimeters
W2 (US Units): 0 in
W2 (Metric Units): 0 millimeters
Satisfactory of MR of (US Units): 0 in
Satisfactory of MR of (Metric Units): 0 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for 2024-06-20-123-5
Test was verified on 8/21/2024 ✔