Summary for Test 2024-07-28-9-3
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 995055 DEA: 024H0504 EFIS: 0218000080 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-273,299-18.5/18.7,24.1/30.3 |
| Award Date | 11/16/2023 |
| Closeout Date | Not set |
| Work Description | PLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING. |
| Location Description | SHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE |
| QA Service Level | 1 (Verified on 10/09/2023) |
Sample Information
| Sample Taken Date | 07/28/2024 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/01/2024 |
| Sample type | Verification | A brief description of the sample | 2 CANS OF BINDER |
| The quantity of what the sample constitutes | 2 CANS | From where was the sample collected | Source |
| First name of sampler or witnessed by | C | Last name of sampler or witnessed by | B |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Valero - Benicia, CA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 M |
|---|---|---|---|
| Modified | Yes | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-07-28-9
DIME Test ID: 2024-07-28-9-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-08-09
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Hamidullah Barati
Date of test: 08/07/2024
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.614 kPa
Phase Angle (δ) (for the 10 cycles): 61.4 degree
Complex Modulus (G*) (for the 10 measurements): 6.104 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 6.95 kPa
Stress Amplitude 2: 0.341 kPa
Phase Angle 2 (δ) (for the 10 cycles): 63.0 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 3.397 kPa
Test Temperature (Specimen 2): 64.0 C
Dynamic Shear 2, G*/sin(δ): 3.81 kPa
Delta at 2.2 kpa: 63.8 degree
General comments (publicly viewable) (Max 1000 characters): RTFO +6C
Test was verified on 8/9/2024 ✔