Summary for Test 2024-07-18-8-3
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 995089 DEA: 010M8104 EFIS: 0123000072 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-36-7/42 |
| Award Date | 01/10/2023 |
| Closeout Date | 11/03/2025 |
| Work Description | Not set |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 08/21/2023) |
Sample Information
| Sample Taken Date | 07/18/2024 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/18/2024 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA w/ RAP |
| The quantity of what the sample constitutes | 1 Working Day | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Reeves |
| Title of sampler | ARE | Telephone number of sampler | 7075997930 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Mercer-Fraser — Plant B (Fortuna, CA) | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 2 | HMA Mix Number | L230245 |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2024-08-3: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 2 | 2024-07-18-8-3 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-07-18-8
DIME Test ID: 2024-07-18-8-3
Testing Lab: CT D01 - Fortuna Field Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2024-08-05
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Ben Reeves
Date of test: 08/05/2024
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1512.4 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 12.8 grams | 99 % | |||||
| 383.8 grams | 75 % | |||||
| 714.0 grams | 53 % | |||||
| 919.0 grams | 39 % | |||||
| 1047.9 grams | 31 % | |||||
| 1174.5 grams | 22 % | |||||
| 1274.4 grams | 16 % | |||||
| 1338.7 grams | 11.5 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/5/2024 ✔