Summary for Test 2024-07-17-59-2

Test performed: AASHTO T209-22

Project Information

Project IdentifiersProject ID: 995055
DEA: 024H0504
EFIS: 0218000080
DIST-CO-RTE-PM02-SHA-273,299-18.5/18.7,24.1/30.3
Award Date11/16/2023
Closeout DateNot set
Work DescriptionPLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING.
Location DescriptionSHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE
QA Service Level1 (Verified on 10/09/2023)

Sample Information

Sample Taken Date07/17/2024 Sample Unique Key59
Date that the sample was received by the laboratory/organization performing the testing07/17/2024 Sample typeAcceptance
A brief description of the sample1 bags of RAP The quantity of what the sample constitutesProduction Start Up Evaluation
From where was the sample collectedManufacturer First name of sampler or witnessed byTerry
Last name of sampler or witnessed byMcCormick Title of samplerConsultant
Telephone number of sampler Laboratory sample identificationD79645B
Linked DIME Sample ID The fabricator/manufacturer/facility nameTullis Inc. - Northstate Asphalt (Redding CA)
Transportation Laboratory (TL) Number876874 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeReclaimed Asphalt Pavement RAP SourceTullis, Northstate Asphalt, Redding, CA
Aggregate Size Aggregate Source
RAP Stockpile Stockpile Size (tons)
Reclaimed Asphalt Pavement Mix Number

Test Details

DIME Sample ID: 2024-07-17-59
DIME Test ID: 2024-07-17-59-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2024-07-23

Test Results


Number of Samples: 1
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 07/22/2024
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7333.0 grams
Mass of oven-dry sample in air for Sample 1: 1585.0 grams
Mass of container filled with the sample and water for Sample 1: 8314.2 grams
Temperature of Water: 26 °F
Specific Gravity for Sample 1: 2.625
Theoretical maximum density at 25°C (77°F): 2617 kg/m^3
General comments (publicly viewable) (Max 1000 characters): Gmmr=2.625

Test was verified on 7/23/2024 ✔