Summary for Test 2024-05-14-4-2
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 99999 DEA: 0322222 |
---|---|
DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
QA Service Level | (Verified on 04/05/2013) |
Sample Information
Sample Taken Date | 05/14/2024 | Sample Unique Key | 4 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2024 |
Sample type | Quality Control | A brief description of the sample | 1 |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Source |
First name of sampler or witnessed by | 1 | Last name of sampler or witnessed by | 1 |
Title of sampler | 11 | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Test Only | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-003-001 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | test | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-05-14-4
DIME Test ID: 2024-05-14-4-2
Testing Lab: CT HQ - Sacramento Materials Management Branch Field Office
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2024-07-23
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Alexis Corona
Date of test: 07/23/2024
Individual Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
88888 grams | ||||||
7777.1 grams | 84 % | |||||
6666.1 grams | 91 % | |||||
5555.1 grams | 78 % | |||||
4444.1 grams | 73 % | |||||
3333.1 grams | 69 % | |||||
2222.1 grams | 66 % | |||||
1111.1 grams | 65 % | |||||
999.1 grams | 64 % | |||||
888.1 grams | 63 % | |||||
777.1 grams | ||||||
666.1 grams | 9 % | |||||
0.1 grams | 9 % | |||||
0.1 grams | 9 % | |||||
0.1 grams | 9 % | |||||
0.1 grams | 9 % | |||||
0.1 grams | 9 % |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/23/2024 ✔