Summary for Test 2024-07-12-64-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 995031
DEA: 023H82U4
EFIS: 0223000011
DIST-CO-RTE-PM02-LAS-44-0.0/37.2
Award Date10/24/2023
Closeout Date07/03/2025
Work DescriptionREPLACE AC SURFACING, PLACE RHMA, HMA, THERMOPLASTIC TRAFFIC STRIPE.
Location DescriptionLASSEN COUNTY ABOUT 9 MILES EAST OF OLD STATION FROM SHASTA COUNTY LINE TO ROUTE 36
QA Service Level1 (Verified on 08/10/2023)

Sample Information

Sample Taken Date07/12/2024 Sample Unique Key64
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/12/2024
Sample typeAcceptance A brief description of the sample1 Bag Cold Feed
The quantity of what the sample constitutes500 tons From where was the sample collectedDistributor
First name of sampler or witnessed byBrandon Last name of sampler or witnessed byWhite
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79640 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek - Ward Lake Transportation Laboratory (TL) Number848917
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-18-0008
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedPlant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
2024-09-28: HMA Aggregates (Size 3/4"): RHMA-G - Continuous Mixing Plant - Sieve Analysis12024-07-12-64-1

Test Details

DIME Sample ID: 2024-07-12-64
DIME Test ID: 2024-07-12-64-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-09-18

Test Results


What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 07/22/2024
Cumulative Mass RetainedCumulative Percent Passing
5008.4 grams
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
63.0 grams99 %
896.0 grams82 %
1840.0 grams63 %
3378.0 grams33 %
500.2 grams
173.4 grams22 %
276.7 grams15 %
338.1 grams11 %
378.1 grams8 %
407.6 grams6 %
427.0 grams4.8 %
429.3 grams
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/18/2024