Summary for Test 2024-06-30-13-2
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 994686 DEA: 051K4604 EFIS: 0518000210 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-46-29.7/32.2 |
| Award Date | 09/01/2023 |
| Closeout Date | 04/01/2025 |
| Work Description | COLD PLANE, PLACE HMA, RHMA, CONC PVMT, MODIFY SIGNAL AND LIGHTING. |
| Location Description | SAN LUIS OBISPO COUNTY IN PASO ROBLES FROM 300 FEET WEST OF ROUTE 101/46 SEPARATION TO 0.1 MILE EAST OF AIRPORT ROAD |
| QA Service Level | 1 (Verified on 04/18/2023) |
Sample Information
| Sample Taken Date | 06/30/2024 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/11/2024 |
| Sample type | Dispute Resolution | A brief description of the sample | 3/4" HMA-A 15% RAP PG 64-28PM w/LAS |
| The quantity of what the sample constitutes | 8 boxes of mix, Two bags aggs, 1 bag of rap, two quart cans of oil | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Larey-Chezem |
| Title of sampler | TET | Telephone number of sampler | (209) 610-9363 |
| Laboratory sample identification | 024-050 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | SPM-Avenal | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-10-0006 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Jobsite | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 1 | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-30-13
DIME Test ID: 2024-06-30-13-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-07-19
Test Results
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 07/16/2024
Mass of saturated surface dry sample (before pycnometer) (S): 503.4 grams
Mass of the pycnometer with water and aggregate (C): 979.7 grams
Mass of the pycnometer with water (B): 672.9 grams
Mass of the oven dried sample (before pycnometer) (A): 486.2 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 503.4 grams
Mass of the oven dry aggregate (for absorption) (A): 486.2 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.473
Bulk specific gravity (SSD Basis): 2.561
Apparent specific gravity: 2.710
Absorption: 3.5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/19/2024 ✔