Summary for Test 2024-06-24-101-2
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 1000089 DEA: 024J8904 EFIS: 0223000084 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-6.0/R12.6 |
| Award Date | 04/04/2024 |
| Closeout Date | 01/24/2025 |
| Work Description | RHMA (GAP GRADED) OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TEHAMA COUNTY NEAR PLATINA FROM 3.3 MILES WEST OF VESTAL ROAD TO 2.3 MILES EAST OF DRY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 06/24/2024 | Sample Unique Key | 101 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/16/2024 |
| Sample type | Verification | A brief description of the sample | Asphalt Binder PG 70-10 |
| The quantity of what the sample constitutes | 2 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | C | Last name of sampler or witnessed by | Bryant |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Pacific NW OIL | Transportation Laboratory (TL) Number | C876867 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | D79595 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Knife River - Orland | |
| Certified Asphalt Supplier | Pacific Northwest Oil - Stockton CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-24-101
DIME Test ID: 2024-06-24-101-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-07-25
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Hamidullah Barati
Date of test: 07/19/2024
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.321 kPa
Phase Angle (δ) (for the 10 cycles): 83.1 degree
Complex Modulus (G*) (for the 10 measurements): 3.193 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 3.22 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 7/25/2024 ✔