Summary for Test 2024-06-24-107-1
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 994686 DEA: 051K4604 EFIS: 0518000210 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-46-29.7/32.2 |
| Award Date | 09/01/2023 |
| Closeout Date | 04/01/2025 |
| Work Description | COLD PLANE, PLACE HMA, RHMA, CONC PVMT, MODIFY SIGNAL AND LIGHTING. |
| Location Description | SAN LUIS OBISPO COUNTY IN PASO ROBLES FROM 300 FEET WEST OF ROUTE 101/46 SEPARATION TO 0.1 MILE EAST OF AIRPORT ROAD |
| QA Service Level | 1 (Verified on 04/18/2023) |
Sample Information
| Sample Taken Date | 06/24/2024 | Sample Unique Key | 107 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/16/2024 |
| Sample type | Dispute Resolution | A brief description of the sample | 1/2" RHMA-G |
| The quantity of what the sample constitutes | Four boxes of mix | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Larey-Chezem |
| Title of sampler | TET | Telephone number of sampler | (209) 610-9363 |
| Laboratory sample identification | 024-053 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | SPM-Templeton | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 5 | HMA Mix Number | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-24-107
DIME Test ID: 2024-06-24-107-1
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2024-07-19
Test Results
Number of tests: 2
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Water
Input Type: Measured
Tester's full name: James Brewster
Date of test: 07/18/2024
Method Performed: Mechanical Agitation - Method A
Mass of oven-dry sample in air for Sample 1: 1548.7 grams
Mass of sample in water for Sample 1: 889.5 grams
Mass of oven-dry sample in air for Sample 2: 1537.3 grams
Mass of sample in water for Sample 2: 884.1 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.349
Specific Gravity for Sample 2: 2.353
Average Specific Gravity: 2.351
Theoretical maximum density at 25°C (77°F): 146.3 lb/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/19/2024 ✔