DIME - Test Summary

Summary for Test 2024-06-26-61-3

Test performed: AASHTO T30-19

Project Identifiers	Project ID: 214135 DEA: 09213404 EFIS: 0900000030
DIST-CO-RTE-PM	09-INY-395-29.9/41.8
Award Date	10/22/2021
Closeout Date	Not set
Work Description	ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT.
Location Description	INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE
QA Service Level	1 (Verified on 05/03/2019)

Sample Taken Date	06/26/2024	Sample Unique Key	61
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/26/2024
Sample type	Quality Assurance	A brief description of the sample	3/4" CF & RAP
The quantity of what the sample constitutes	1 Bag of Coldfeed & RAP	From where was the sample collected	Source
First name of sampler or witnessed by	Jerid	Last name of sampler or witnessed by	Kupelian
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	CF-R150	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Fisher Sand and Gravel	Transportation Laboratory (TL) Number	0079
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	00-00-0000
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Sample Device at Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Combined Gradation Report Id	Bin Index	Dime Test Id
2024-06-69: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP	2	2024-06-26-61-3
2024-06-71: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP	2	2024-06-26-61-3
2024-06-72: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP	2	2024-06-26-61-3
2024-06-73: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP	2	2024-06-26-61-3

DIME Sample ID: 2024-06-26-61

DIME Test ID: 2024-06-26-61-3

Testing Lab: CT D09 - Bishop Field Laboratory

Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)

Test Release Date: 2024-06-28

Does this test use 1/4 sieve?: No

Is an aggregate correction factor used?: Yes

Input Type: Measured

Tester's full name: Jerid Kupelian

Date of test: 06/28/2024

	Cumulative Mass Retained	Correction Factor	Cumulative Percent Passing
Total mass of material in the sample	2670.1 grams
2 in. sieve	0.0 grams	0.0 %	100 %
1 1/2 in. sieve	0.0 grams	0.0 %	100 %
1 in. sieve	0.0 grams	0.0 %	100 %
3/4 in. sieve	64.9 grams	0.2 %	98 %
1/2 in. sieve	360.1 grams	-5.1 %	81 %
3/8 in. sieve	522.3 grams	-5.1 %	75 %
#4 sieve	910.6 grams	-6.5 %	59 %
#8 sieve	1228.1 grams	-3.0 %	51 %
#16 sieve	1537.2 grams	-2.4 %	40 %
#30 sieve	1796.1 grams	-2.4 %	30 %
#50 sieve	2029.9 grams	-2.7 %	21 %
#100 sieve	2233.9 grams	-2.5 %	14 %
#200 sieve	2393.2 grams	-2.1 %	8.3 %
Cumulative mass retained on the pan	2474.6 grams

General comments (publicly viewable) (Max 1000 characters): CF-R150 RAP

Test was verified on 6/28/2024 ✔