Summary for Test 2024-06-07-39-2
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 994946 DEA: 081M5804 |
---|---|
DIST-CO-RTE-PM | 08-RIV-10,15,74-var |
Award Date | 08/24/2023 |
Closeout Date | Not set |
Work Description | FURNISH POLYESTER CONC OVERLAY, PLACE POLYESTER CONC OVERLAY AND HMA. |
Location Description | RIVERSIDE COUNTY AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 08/15/2023) |
Sample Information
Sample Taken Date | 06/07/2024 | Sample Unique Key | 39 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/10/2024 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R25 0.5% LAS |
The quantity of what the sample constitutes | 2 Bags Of Coldfeed Agg., 1 Bag Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Joseph / Hector | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0285A-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta (CCA) Lake Elsinore | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0098 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Martin Marietta Lake Elsinore Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 53417105 | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-06-07-39
DIME Test ID: 2024-06-07-39-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-07-10
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 06/12/2024
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 962.5 grams
Mass of the pycnometer with water (B): 655.9 grams
Mass of the oven dried sample (before pycnometer) (A): 492.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 492.1 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.544
Bulk specific gravity (SSD Basis): 2.585
Apparent specific gravity: 2.653
Absorption: 1.6 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/10/2024 ✔