DIME - Test Summary

Summary for Test 2024-06-07-39-1

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 994946 DEA: 081M5804
DIST-CO-RTE-PM	08-RIV-10,15,74-var
Award Date	08/24/2023
Closeout Date	Not set
Work Description	FURNISH POLYESTER CONC OVERLAY, PLACE POLYESTER CONC OVERLAY AND HMA.
Location Description	RIVERSIDE COUNTY AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 08/15/2023)

Sample Taken Date	06/07/2024	Sample Unique Key	39
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/10/2024
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R25 0.5% LAS
The quantity of what the sample constitutes	2 Bags Of Coldfeed Agg., 1 Bag Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Joseph / Hector	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0285A-24	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Martin Marietta (CCA) Lake Elsinore	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0098
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Martin Marietta Lake Elsinore Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	53417105	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2024-06-07-39

DIME Test ID: 2024-06-07-39-1

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2024-07-10

What type of gradation is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: Yes

Input Type: Calculated

Tester's full name: Satish Jain/David Padilla

Date of test: 06/12/2024

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 94 %

Cumulative percent passing the 1/2 in. sieve: 66 %

Cumulative percent passing the 3/8 in. sieve: 54 %

Cumulative percent passing the #4 sieve: 37 %

Cumulative percent passing the #8 sieve: 26 %

Cumulative percent passing the #16 sieve: 17 %

Cumulative percent passing the #30 sieve: 11 %

Cumulative percent passing the #50 sieve: 7 %

Cumulative percent passing the #100 sieve: 5 %

Cumulative percent passing the #200 sieve: 3.8 %

General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation

Test was verified on 7/10/2024 ✔