Summary for Test 2024-06-10-45-1
Test performed: ASTM C39-18Project Information
| Project Identifiers | Project ID: 994309 DEA: 033H5404 EFIS: 0318000012 |
|---|---|
| DIST-CO-RTE-PM | 03-BUT-70-46.0/47.0 |
| Award Date | 02/10/2023 |
| Closeout Date | Not set |
| Work Description | RAISE ALIGNMENT, PLACE HMA, STRUCTURAL CONCRETE & BRIDGE RAIL. |
| Location Description | BUTTE COUNTY NEAR PARADISE FROM 0.8 MILE WEST OF SHADY REST AREA TO 0.2 MILE EAST OF SHADY REST AREA |
| QA Service Level | 1 (Verified on 10/04/2022) |
Sample Information
| Sample Taken Date | 06/10/2024 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 06/11/2024 |
| Sample type | Acceptance | A brief description of the sample | concrete |
| The quantity of what the sample constitutes | 36 CY | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Nicholas | Last name of sampler or witnessed by | McLean |
| Title of sampler | Assistant Structures Representative | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Mathews Readymix | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Pulga Wall 2 | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | G7215PA |
|---|---|---|---|
| The truck number from where the sample was collected | 745 | The batch plant ticket number from where the sample was collected | 16027031 |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | CHUTE OF TRUCK | Where the material sample would have been placed if not sampled | Wall 2 - 255' - 391' |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-10-45
DIME Test ID: 2024-06-10-45-1
Testing Lab: CT D03 - Chico Field Laboratory
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2024-06-17
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Measured
Tester's full name: Brad McKeehan
Date of test: 06/17/2024
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 34200 lb
Maximum load on cylinder 2: 37310 lb
Maximum load on cylinder 3: 36810 lb
Type of fracture pattern of cylinder 1: 5
Type of fracture pattern of cylinder 2: 5
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 7 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength of cylinder 1: 2720.8 psi
Compressive strength of cylinder 2: 2968.2 psi
Compressive strength of cylinder 3: 2928.4 psi
Compressive strength (to nearest 10 psi): 2870 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/17/2024 ✔