Summary for Test 2024-06-10-58-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214135 DEA: 09213404 EFIS: 0900000030 |
---|---|
DIST-CO-RTE-PM | 09-INY-395-29.9/41.8 |
Award Date | 10/22/2021 |
Closeout Date | Not set |
Work Description | ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT. |
Location Description | INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE |
QA Service Level | 1 (Verified on 05/03/2019) |
Sample Information
Sample Taken Date | 06/10/2024 | Sample Unique Key | 58 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/10/2024 |
Sample type | Acceptance | A brief description of the sample | 3/4" CF & RAP |
The quantity of what the sample constitutes | 1 Bag of Coldfeed | From where was the sample collected | Source |
First name of sampler or witnessed by | Jerid | Last name of sampler or witnessed by | Kupelian |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | CF-R111 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Fisher Sand and Gravel | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 00-00-0000 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Sample Device at Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
2024-06-28: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 1 | 2024-06-10-58-1 |
Test Details
DIME Sample ID: 2024-06-10-58
DIME Test ID: 2024-06-10-58-1
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-06-10
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Jerid Kupelian
Date of test: 06/10/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
5241.7 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
469.3 grams | 91 % | |||||
1531.5 grams | 71 % | |||||
2018.6 grams | 61 % | |||||
3328.8 grams | 36 % | |||||
486.7 grams | ||||||
164.8 grams | 24 % | |||||
243.3 grams | 18 % | |||||
299.7 grams | 14 % | |||||
351.9 grams | 10 % | |||||
396.8 grams | 7 % | |||||
427.5 grams | 4.4 % | |||||
438.1 grams |
General comments (publicly viewable) (Max 1000 characters): CF-R111
Test was verified on 6/12/2024 ✔