Summary for Test 2024-06-02-10-7
Test performed: AASHTO T166-16Project Information
| Project Identifiers | Project ID: 993825 DEA: 040Q30U4 EFIS: 0420000235 COOP: 042830A3,042830A4 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA,CC-680-R11.0/R21.9,R0.0/R0.9 |
| Award Date | 11/23/2022 |
| Closeout Date | Not set |
| Work Description | PRECAST CONC PVMT, ELECTRONIC TOLL SYSTEM, JPCP, CB & STRUCTURAL CONC |
| Location Description | ALAMEDA AND CONTRA COSTA COUNTIES AT SUNOL AND IN SAN RAMON BETWEEN 0.4 MILE SOUTH OF CALAVERAS ROAD UNDERCROSSING TO 0.9 MILE NORTH OF ALCOSTA BOULEVARD OVERCROSSING |
| QA Service Level | 1 (Verified on 05/11/2022) |
Sample Information
| Sample Taken Date | 06/02/2024 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/03/2024 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4 HMA-SP Type A |
| The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Source |
| First name of sampler or witnessed by | Bhalinder | Last name of sampler or witnessed by | Pandher |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Pleasanton | Transportation Laboratory (TL) Number | C772183 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 5 |
| Sublot number | 9 | HMA Mix Number | 220304 |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-06-02-10
DIME Test ID: 2024-06-02-10-7
Testing Lab: CT D04 - Pleasanton Field Laboratory
Test Method: AASHTO T166-16: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens (Method A)
Test Release Date: 2024-06-11
Test Results
Number of tests: 2
Input Type: Measured
Tester's full name: Rob Lohman
Date of test: 06/07/2024
Mass 1 of the specimen in air: 1924.6 g
Mass 1 of the surface dry specimen in air: 1928.4 g
Mass 1 of the specimen in water: 1123.1 g
Mass 2 of the specimen in air: 923.5 g
Mass 2 of the surface dry specimen in air: 925.5 g
Mass 2 of the specimen in water: 533.4 g
Bulk Specific Gravity 1: 2.390
Bulk Specific Gravity 2: 2.355
Percent of water absorbed by volume 1: 0.47 %
Percent of water absorbed by volume 2: 0.51 %
Average Bulk Specific Gravity: 2.373
General comments (publicly viewable) (Max 1000 characters): Lot 5 Sublot 10
Test was verified on 6/11/2024 ✔