Summary for Test 2024-06-03-25-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 995240 DEA: 060X3804 EFIS: 0618000060 |
---|---|
DIST-CO-RTE-PM | 06-KER-166-0.0/10.2 |
Award Date | 02/28/2024 |
Closeout Date | Not set |
Work Description | COLD PLANE, PLACE HMA AND CONCRETE PAVEMENT, MODIFY DRAINAGE SYSTEM. |
Location Description | KERN COUNTY IN AND NEAR MARICOPA FROM SOUTH JUNCTION ROUTE 33 TO 2.3 MILES WEST OF SAN EMIGDIO CREEK BRIDGE |
QA Service Level | 1 (Verified on 04/02/2024) |
Sample Information
Sample Taken Date | 06/03/2024 | Sample Unique Key | 25 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/04/2024 |
Sample type | Acceptance | A brief description of the sample | Class 2 AB |
The quantity of what the sample constitutes | Class 2 AB 1 bags | From where was the sample collected | Job Site |
First name of sampler or witnessed by | QC | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Collected at jobsite | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-15-0068 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Windrow | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-06-03-25
DIME Test ID: 2024-06-03-25-1
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2024-06-04
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 06/04/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
8105 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
240.5 grams | 97 % | |||||
1545 grams | 81 % | |||||
2398 grams | 70 % | |||||
3894.5 grams | 52 % | |||||
517.5 grams | ||||||
89.2 grams | 43 % | |||||
177 grams | 34 % | |||||
264.4 grams | 25 % | |||||
340.9 grams | 18 % | |||||
396.3 grams | 12 % | |||||
430.1 grams | 9 % |
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
---|---|---|---|---|---|
06-0X3804_37038_240603 | 28.97 KB | 06/04/2024 | 2024-06-03-25-1 | Info |
Test was verified on 6/4/2024 ✔