Summary for Test 2024-05-20-122-1
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 995055 DEA: 024H0504 EFIS: 0218000080 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-273,299-18.5/18.7,24.1/30.3 |
| Award Date | 11/16/2023 |
| Closeout Date | Not set |
| Work Description | PLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING. |
| Location Description | SHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE |
| QA Service Level | 1 (Verified on 10/09/2023) |
Sample Information
| Sample Taken Date | 05/20/2024 | Sample Unique Key | 122 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/31/2024 |
| Sample type | Verification | A brief description of the sample | 1/2 HMA W/ 25% RAP |
| The quantity of what the sample constitutes | 2 can asphalt binder | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Brandon | Last name of sampler or witnessed by | White |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Tullis Northstate Asphalt | Transportation Laboratory (TL) Number | C692876 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Tullis Northstate Asphalt | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-05-20-122
DIME Test ID: 2024-05-20-122-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-06-03
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Karen Sawyer
Date of test: 06/03/2024
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.140 kPa
Phase Angle (δ) (for the 10 cycles): 86.0 degree
Complex Modulus (G*) (for the 10 measurements): 1.159 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.16 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 6/3/2024 ✔