DIME - Test Summary

Summary for Test 2024-05-20-67-10

Test performed: AASHTO T30-19

Project Identifiers	Project ID: 993432 DEA: 11423804 EFIS: 1116000061
DIST-CO-RTE-PM	11-SD-94,125-R9.8/R10.6,12.9/22.3
Award Date	04/27/2022
Closeout Date	Not set
Work Description	CONSTRUCT INDIVIDUAL SLAB, HMA, RHMA, MODIFY LANDSCAPE AND ELECTRICAL.
Location Description	SAN DIEGO COUNTY ON ROUTE 94 FROM E94/N125 SEPARATION IN LEMON GROVE TO 0.1 MILE EAST OF SPRING STREET UNDERCROSSING IN LA MESA AND ON ROUTE 125 FROM 0.6 MILE SOUTH OF SPRING STREET UNDERCROSSING NEAR LA MESA TO MISSION GORGE ROAD IN SANTEE
QA Service Level	1 (Verified on 12/20/2021)

Sample Taken Date	05/20/2024	Sample Unique Key	67
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/20/2024
Sample type	Quality Assurance	A brief description of the sample	PSU
The quantity of what the sample constitutes	3 bags	From where was the sample collected	Source
First name of sampler or witnessed by	Ben	Last name of sampler or witnessed by	Smith
Title of sampler		Telephone number of sampler
Laboratory sample identification	0702-PSU	Linked DIME Sample ID	2024-05-20-66
The fabricator/manufacturer/facility name	Martin Marietta	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-37-0036
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Combined Aggregates
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2024-05-20-67

DIME Test ID: 2024-05-20-67-10

Testing Lab: CT D11 - District 11 Materials Laboratory

Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)

Test Release Date: 2024-06-11

Does this test use 1/4 sieve?: No

Is an aggregate correction factor used?: No

Input Type: Calculated

Tester's full name: Mohammad Abbassi

Date of test: 05/29/2024

Cumulative percent passing the 2 in. sieve: 0 %

Cumulative percent passing the 1 1/2 in. sieve: 0 %

Cumulative percent passing the 1 in. sieve: 0 %

Cumulative percent passing the 3/4 in. sieve: 0 %

Cumulative percent passing the 1/2 in. sieve: 14 %

Cumulative percent passing the 3/8 in. sieve: 280 %

Cumulative percent passing the #4 sieve: 928 %

Cumulative percent passing the #8 sieve: 1081 %

Cumulative percent passing the #16 sieve: 1183 %

Cumulative percent passing the #30 sieve: 1268 %

Cumulative percent passing the #50 sieve: 1336 %

Cumulative percent passing the #100 sieve: 1372 %

Cumulative percent passing the #200 sieve: 1386.2 %

General comments (publicly viewable) (Max 1000 characters): Complies

Test was verified on 6/11/2024 ✔