Summary for Test 2024-05-22-4-1
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 994828 DEA: 043Y4104 EFIS: 0423000232 |
|---|---|
| DIST-CO-RTE-PM | 04-CC,SM-680-25.04/25.46, VAR/VAR |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Paint removal and non-destructive testing (NDT) on butt weld connections on T1 type steel in fracture critical members of three distinct existing toll bridge. |
| Location Description | Carquinez Bridge Overhead (Br. No. 23-0015R), Benicia-Martinez Bridge Overhead (Br. No. 28-0153L), and San Mateo-Hayward Bridge (Br. No. 35-0054). County = SM,CC,SOL. Route = 680,80,92. |
| QA Service Level | 1 (Verified on 05/16/2023) |
Sample Information
| Sample Taken Date | 05/22/2024 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/24/2024 |
| Sample type | Quality Assurance | A brief description of the sample | ASTM A325 Bolt Assembly |
| The quantity of what the sample constitutes | 48 ea | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Ryan | Last name of sampler or witnessed by | Parr |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bay Bolt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B373-057-24 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 10610400 1000216350 C72845 | Nut Mfg. Lot Number(s) | W000034072 |
| Washer Mfg. Lot Number(s) | 175013 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 5-1/2” | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 5/8” | Bolt Mfg. Lot Number | L873I1 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-05-22-4
DIME Test ID: 2024-05-22-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2024-06-03
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: aauvinen
Date of test: 05/29/2024
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | L873I1 | 0.6250 | 32404 | 144.14 | 10.00 | Wedge Tensile | aauvinen |
General comments (publicly viewable) (Max 1000 characters): Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 6/3/2024 ✔