Summary for Test 2024-05-01-75-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994226 DEA: 042K7004 EFIS: 0417000010 COOP: 042895 |
---|---|
DIST-CO-RTE-PM | 04-ALA-880-R0.0/11.8 |
Award Date | 07/13/2023 |
Closeout Date | Not set |
Work Description | Cold plane pavement and overlay with RHMA-G/RHMA-O (CAPITAL PREVENTIVE MAINTENANCE) |
Location Description | ALAMEDA COUNTY IN FREMONT AND NEWARK FROM SANTA CLARA COUNTY LINE TO 0.4 MILE NORTH OF FREMONT BOULEVARD OVERCROSSING |
QA Service Level | 1 (Verified on 09/13/2022) |
Sample Information
Sample Taken Date | 05/01/2024 | Sample Unique Key | 75 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/02/2024 |
Sample type | Quality Assurance | A brief description of the sample | 1/2 RHMA-G |
The quantity of what the sample constitutes | 0-750 Tons | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Holie | Last name of sampler or witnessed by | Sada |
Title of sampler | Plant QC Tech | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan Materials Co - Pleasanton | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | MD #326122 | The fabricator/manufacturer designation for the sample | Sample #1 |
The plant number | A detailed description of where the material sample was collected | Plant Sampler | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | D04-JMF-22-041 | Lot number | 2 |
Sublot number | 5 | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-05-01-75
DIME Test ID: 2024-05-01-75-2
Testing Lab: CT D04 - Hayward Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-06-17
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Robert Lohman
Date of test: 05/02/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2575 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
110.0 grams | 96 % | |||||
383.0 grams | 85 % | |||||
1375.0 grams | 47 % | |||||
361 grams | ||||||
168.0 grams | 25 % | |||||
239.0 grams | 16 % | |||||
278.0 grams | 11 % | |||||
303.0 grams | 8 % | |||||
322.0 grams | 5 % | |||||
329.8 grams | 4.1 % | |||||
330.3 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/17/2024 ✔