Summary for Test 2024-05-19-10-3
Test performed: ASTM D4791-10Project Information
| Project Identifiers | Project ID: 993432 DEA: 11423804 EFIS: 1116000061 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-94,125-R9.8/R10.6,12.9/22.3 |
| Award Date | 04/27/2022 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT INDIVIDUAL SLAB, HMA, RHMA, MODIFY LANDSCAPE AND ELECTRICAL. |
| Location Description | SAN DIEGO COUNTY ON ROUTE 94 FROM E94/N125 SEPARATION IN LEMON GROVE TO 0.1 MILE EAST OF SPRING STREET UNDERCROSSING IN LA MESA AND ON ROUTE 125 FROM 0.6 MILE SOUTH OF SPRING STREET UNDERCROSSING NEAR LA MESA TO MISSION GORGE ROAD IN SANTEE |
| QA Service Level | 1 (Verified on 12/20/2021) |
Sample Information
| Sample Taken Date | 05/19/2024 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/20/2024 |
| Sample type | Quality Assurance | A brief description of the sample | HMA-A |
| The quantity of what the sample constitutes | 3 bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0701-PSU | Linked DIME Sample ID | 2024-05-19-9 |
| The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Combined Aggregates | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-05-19-10
DIME Test ID: 2024-05-19-10-3
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Test Release Date: 2024-06-11
Test Results
Method A - Percentage of Flat Particles, Elongated Particles, and Flat & Elongated Particles
Method B - Flat & Elongated Particles
Method: A
Determination: By Number
Dimensional ratio used: 5:1
Input Type: Calculated
Tester's full name: Mohammad Abbassi
Date of test: 05/23/2024
Weighted percentage of particles (by number) that were flat: 294 %
Weighted percentage of particles (by number) that were elongated: 0 %
Weighted percentage of particles (by number) that were both flat and elongated: 6 %
Weighted percentage of particles (by number) that were neither flat nor elongated: 0 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/11/2024 ✔