Summary for Test 2024-05-19-10-7
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 993432 DEA: 11423804 EFIS: 1116000061 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-94,125-R9.8/R10.6,12.9/22.3 |
| Award Date | 04/27/2022 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT INDIVIDUAL SLAB, HMA, RHMA, MODIFY LANDSCAPE AND ELECTRICAL. |
| Location Description | SAN DIEGO COUNTY ON ROUTE 94 FROM E94/N125 SEPARATION IN LEMON GROVE TO 0.1 MILE EAST OF SPRING STREET UNDERCROSSING IN LA MESA AND ON ROUTE 125 FROM 0.6 MILE SOUTH OF SPRING STREET UNDERCROSSING NEAR LA MESA TO MISSION GORGE ROAD IN SANTEE |
| QA Service Level | 1 (Verified on 12/20/2021) |
Sample Information
| Sample Taken Date | 05/19/2024 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/20/2024 |
| Sample type | Quality Assurance | A brief description of the sample | HMA-A |
| The quantity of what the sample constitutes | 3 bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0701-PSU | Linked DIME Sample ID | 2024-05-19-9 |
| The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Combined Aggregates | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-05-19-10
DIME Test ID: 2024-05-19-10-7
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-06-11
Test Results
Input Type: Measured
Tester's full name: Mohammad Abbassi
Date of test: 05/23/2024
Mass of saturated surface dry sample (before pycnometer) (S): 505 grams
Mass of the pycnometer with water and aggregate (C): 992.2 grams
Mass of the pycnometer with water (B): 680.3 grams
Mass of the oven dried sample (before pycnometer) (A): 496 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 505 grams
Mass of the oven dry aggregate (for absorption) (A): 496 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.569
Bulk specific gravity (SSD Basis): 2.615
Apparent specific gravity: 2.694
Absorption: 1.8 %
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 6/11/2024 ✔