Summary for Test 2024-04-30-22-2
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 994147 DEA: 120R4104 EFIS: 1218000090 |
---|---|
DIST-CO-RTE-PM | 12-ORA-1-17.4/21.5 |
Award Date | 09/27/2022 |
Closeout Date | Not set |
Work Description | COLD PLANE AC AND PLACE RHMA-G. |
Location Description | ORANGE COUNTY IN NEWPORT BEACH FROM JAMBOREE ROAD TO SANTA ANA RIVER BRIDGE |
QA Service Level | 1 (Verified on 06/28/2023) |
Sample Information
Sample Taken Date | 04/30/2024 | Sample Unique Key | 22 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/02/2024 |
Sample type | Verification | A brief description of the sample | JMF 3/4" RHMA-G-SP 0.25% EVO |
The quantity of what the sample constitutes | 4 Bags Of Comb. Agg, 1 Bag each Of Scrap & Hi-Nat | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | R J Noble | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0211G-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | R J Noble -Orange | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0014, 91-33-0027 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at RJ Noble Orange Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 49R003ARSPWEO | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-04-30-22
DIME Test ID: 2024-04-30-22-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-05-29
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 05/07/2024
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 966.3 grams
Mass of the pycnometer with water (B): 655.9 grams
Mass of the oven dried sample (before pycnometer) (A): 493.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493.3 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.602
Bulk specific gravity (SSD Basis): 2.637
Apparent specific gravity: 2.697
Absorption: 1.4 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/29/2024 ✔