Summary for Test 2024-05-13-56-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 993811 DEA: 11422304 EFIS: 1115000180 |
---|---|
DIST-CO-RTE-PM | 11-SD-78-0.3/R16.0 |
Award Date | 10/28/2022 |
Closeout Date | Not set |
Work Description | CULVERT REPAIRS, COLD PLANE, RHMA-G, MODIFY LANDSCAPE AND ELECTRICAL. |
Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 0.3 MILE EAST OF ROUTE 78/5 SEPARATION TO 0.5 MILE WEST OF ROUTE 15/78 SEPARATION |
QA Service Level | 1 (Verified on 06/13/2022) |
Sample Information
Sample Taken Date | 05/13/2024 | Sample Unique Key | 56 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/15/2024 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA |
The quantity of what the sample constitutes | 2 boxes | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Pete | Last name of sampler or witnessed by | Horn |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0512-A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | 21218080SR MM |
Test Details
DIME Sample ID: 2024-05-13-56
DIME Test ID: 2024-05-13-56-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2024-05-23
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Shawn Rivers
Date of test: 05/21/2024
Test procedure used?: Method A
Mass of the specimen basket assembly: 4029.2 g
Mass of the specimen and specimen basket assembly prior to ignition: 5594.1 g
Mass of HMA Sample prior to ignition: 1564.9 g
Mass Loss: 115.3 g
Mass of aggregate remaining after ignition: 1449.6 g
Correction Factor (Percent by mass of HMA Specimen): 0.40 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 6.97 %
General comments (publicly viewable) (Max 1000 characters): Does not comply - Target - 7.5%
Test was verified on 5/23/2024 ✔