Summary for Test 2024-05-13-42-7
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 993811 DEA: 11422304 EFIS: 1115000180 |
---|---|
DIST-CO-RTE-PM | 11-SD-78-0.3/R16.0 |
Award Date | 10/28/2022 |
Closeout Date | Not set |
Work Description | CULVERT REPAIRS, COLD PLANE, RHMA-G, MODIFY LANDSCAPE AND ELECTRICAL. |
Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 0.3 MILE EAST OF ROUTE 78/5 SEPARATION TO 0.5 MILE WEST OF ROUTE 15/78 SEPARATION |
QA Service Level | 1 (Verified on 06/13/2022) |
Sample Information
Sample Taken Date | 05/13/2024 | Sample Unique Key | 42 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2024 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-PSU |
The quantity of what the sample constitutes | 12 boxes | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0510-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | 21218080SR MM |
Test Details
DIME Sample ID: 2024-05-13-42
DIME Test ID: 2024-05-13-42-7
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2024-05-22
Test Results
Specified number of passes at 12.7 mm: 20000
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 05/21/2024
Test Temperature: 122 F
HMA Production: Lab
Compaction Method: SGC Cylindrical Specimen
Binder High PG Grade: no data
Binder Content TWM: no data
Air Void Content: no data
Aggregate Gradation: no data
Type and Amount of Anti-Stripping Additive: Yes 1%
Stripping Inflection Point (Wheel A): >20000
Stripping Inflection Point (Wheel B): >20000
Maximum impression at 5000 passes (left wheel): 4.92 mm
Maximum impression at 5000 passes (right wheel): 5.16 mm
Average impression at 5000 passes (left/right avg): 5.04 mm
Maximum impression at 10000 passes (left wheel): 5.52 mm
Maximum impression at 10000 passes (right wheel): 5.59 mm
Average impression at 10000 passes (left/right avg): 5.56 mm
Maximum impression at 15000 passes (left wheel): 5.96 mm
Maximum impression at 15000 passes (right wheel): 5.91 mm
Average impression at 15000 passes (left/right avg): 5.94 mm
Maximum impression at 20000 passes (left wheel): 6.3 mm
Maximum impression at 20000 passes (right wheel): 6.36 mm
Average impression at 20000 passes (left/right avg): 6.33 mm
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): Complies < 12.2 mm
Test was verified on 5/22/2024 ✔