Summary for Test 2024-05-13-43-10
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 993811 DEA: 11422304 EFIS: 1115000180 |
---|---|
DIST-CO-RTE-PM | 11-SD-78-0.3/R16.0 |
Award Date | 10/28/2022 |
Closeout Date | Not set |
Work Description | CULVERT REPAIRS, COLD PLANE, RHMA-G, MODIFY LANDSCAPE AND ELECTRICAL. |
Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 0.3 MILE EAST OF ROUTE 78/5 SEPARATION TO 0.5 MILE WEST OF ROUTE 15/78 SEPARATION |
QA Service Level | 1 (Verified on 06/13/2022) |
Sample Information
Sample Taken Date | 05/13/2024 | Sample Unique Key | 43 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2024 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-PSU |
The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0510-PSU | Linked DIME Sample ID | 2024-05-13-42 |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Lakeside |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-05-13-43
DIME Test ID: 2024-05-13-43-10
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-05-22
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 05/16/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
3597 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
20.0 grams | 99 % | |||||
747.0 grams | 79 % | |||||
2050.5 grams | 43 % | |||||
634.2 grams | ||||||
170.6 grams | 31 % | |||||
337.4 grams | 20 % | |||||
469.4 grams | 11 % | |||||
573.3 grams | 4 % | |||||
619.5 grams | 1 % | |||||
633.9 grams | 0 % | |||||
634.9 grams |
General comments (publicly viewable) (Max 1000 characters): Failed Coarse Aggs
Test was verified on 5/22/2024 ✔