Summary for Test 2024-01-25-57-2
Test performed: AASHTO T315-22Project Information
Project Identifiers | Project ID: 995054 DEA: 024H0204 EFIS: 0218000069 |
---|---|
DIST-CO-RTE-PM | 02-TEH-36-20.0/39.7 |
Award Date | 10/23/2023 |
Closeout Date | Not set |
Work Description | PLACE RHMA AND HMA, CORRECT SEGMENTS, AND REPLACE AC SURFACING. |
Location Description | TEHAMA COUNTY NEAR RED BLUFF FROM 0.8 MILE EAST OF SALT CREEK BRIDGE TO BAKER ROAD |
QA Service Level | 1 (Verified on 08/14/2023) |
Sample Information
Sample Taken Date | 01/25/2024 | Sample Unique Key | 57 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/02/2024 |
Sample type | Quality Assurance | A brief description of the sample | 2 cans |
The quantity of what the sample constitutes | 2 cans for chip seal/seal coats | From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | PG582212524kf35 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Albina - Klamath Falls, OR | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
---|---|---|---|
Modified | Lot number | ||
Sublot number | Tank number | 35 | |
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Albina Asphalt (Klamath Falls Plant) - Klamath Falls OR | Multigrade | Yes |
Multigrade Type | PG 58-22 / PG 58-16 | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2024-01-25-57
DIME Test ID: 2024-01-25-57-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-05-09
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Karen Sawyer
Date of test: 05/03/2024
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.314 kPa
Phase Angle (δ) (for the 10 cycles): 84.1 degree
Complex Modulus (G*) (for the 10 measurements): 3.128 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 3.14 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 5/9/2024 ✔