Summary for Test 2024-04-12-30-2
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 995233 DEA: 120U1804 EFIS: 1223000052 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-22,55-R3.3/R13.2,12.7/13.0 |
| Award Date | 12/22/2023 |
| Closeout Date | 04/17/2025 |
| Work Description | COLD PLANE AND REPLACE EXISTING PAVEMENT WITH RHMA AND HMA. |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 10/16/2023) |
Sample Information
| Sample Taken Date | 04/12/2024 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2024 |
| Sample type | Verification | A brief description of the sample | JMF Verification 3/4" WMA-A-SP R25 0.25% EVO |
| The quantity of what the sample constitutes | 4 Bags of Agg., 2 Bags Each of Coarse and Fine Agg | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Drake | Last name of sampler or witnessed by | G. |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0174A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Aggregate/ Eagle Valley Quarry/ World Oil/ Ingevity | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027, 91-33-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at RJ Noble Orange Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 36R2508SPWEO | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-04-12-30
DIME Test ID: 2024-04-12-30-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-05-14
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 04/20/2024
Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams
Mass of the pycnometer with water and aggregate (C): 960.0 grams
Mass of the pycnometer with water (B): 649.1 grams
Mass of the oven dried sample (before pycnometer) (A): 492.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams
Mass of the oven dry aggregate (for absorption) (A): 492.8 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.606
Bulk specific gravity (SSD Basis): 2.644
Apparent specific gravity: 2.709
Absorption: 1.5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/14/2024 ✔