DIME - Test Summary

Summary for Test 2024-03-14-46-2

Test performed: AASHTO T104-99r16

Project Identifiers	Project ID: 995055 DEA: 024H0504 EFIS: 0218000080
DIST-CO-RTE-PM	02-SHA-273,299-18.5/18.7,24.1/30.3
Award Date	11/16/2023
Closeout Date	Not set
Work Description	PLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING.
Location Description	SHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE
QA Service Level	1 (Verified on 10/09/2023)

Sample Taken Date	03/14/2024	Sample Unique Key	46
Date that the sample was received by the laboratory/organization performing the testing	03/14/2024	Sample type	Verification
A brief description of the sample	4 bags of 5/8″ Untreated Sized Virgin Aggregate	The quantity of what the sample constitutes	JMF Verification
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Brandon
Last name of sampler or witnessed by	White	Title of sampler
Telephone number of sampler		Laboratory sample identification	D79441A
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Tullis — Northstate Asphalt (Redding, CA)
Transportation Laboratory (TL) Number	035782A	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0061::Latona Aggregates
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Untreated Sized Virgin Aggregate Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2024-03-14-46

DIME Test ID: 2024-03-14-46-2

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)

Test Release Date: 2024-05-01

Percentage of the total sample represented by each size

Size of aggregate being tested: Coarse Aggregate

What type of solution was used?: Sodium sulfate

What was the condition of the solution?: Freshly prepared

Number of immersion cycles performed: 5

Input Type: Calculated

Tester's full name: Ryan Kester

Date of test: 04/26/2024

Percentage of 2 ½ x 1 ½ material loss: 0 %

Percentage of 1 ½ x ¾ inch material loss: 0 %

Percentage of ¾ x ⅜ inch material loss: 1 %

Percentage of ⅜ inch x No. 4 material loss: 0.9 %

Coarse weighted average loss: 0.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/1/2024 ✔