Summary for Test 2024-03-04-21-7
Test performed: AASHTO T335-09r13Project Information
| Project Identifiers | Project ID: 995233 DEA: 120U1804 EFIS: 1223000052 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-22,55-R3.3/R13.2,12.7/13.0 |
| Award Date | 12/22/2023 |
| Closeout Date | 04/17/2025 |
| Work Description | COLD PLANE AND REPLACE EXISTING PAVEMENT WITH RHMA AND HMA. |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 10/16/2023) |
Sample Information
| Sample Taken Date | 03/04/2024 | Sample Unique Key | 21 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/07/2024 |
| Sample type | Verification | A brief description of the sample | JMF 1/2"RWHMA-G-SP 0.25% Evo |
| The quantity of what the sample constitutes | 4 Bags of Agg, 1 Bag each of Crum Rubber & Hi- Nat | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | RJ Noble | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0130G-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | R J Noble Orange | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at R J Noble- Orange | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | 50R003ARSPWEO | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-03-04-21
DIME Test ID: 2024-03-04-21-7
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2024-05-14
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Input Type: Calculated
Tester's full name: M.L.
Date of test: 03/19/2024
Percentage of fractured, coarse, 2 faced particles tested: 97 %
Percentage of fractured, coarse, 1 faced particles tested: 97 %
Percentage of fractured, fine, 1 faced particles tested: 94 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/14/2024 ✔