DIME - Test Summary

Summary for Test 2024-03-04-21-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 995233 DEA: 120U1804 EFIS: 1223000052
DIST-CO-RTE-PM	12-ORA-22,55-R3.3/R13.2,12.7/13.0
Award Date	12/22/2023
Closeout Date	04/17/2025
Work Description	COLD PLANE AND REPLACE EXISTING PAVEMENT WITH RHMA AND HMA.
Location Description	ORANGE COUNTY AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 10/16/2023)

Sample Taken Date	03/04/2024	Sample Unique Key	21
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/07/2024
Sample type	Verification	A brief description of the sample	JMF 1/2"RWHMA-G-SP 0.25% Evo
The quantity of what the sample constitutes	4 Bags of Agg, 1 Bag each of Crum Rubber & Hi- Nat	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	RJ Noble	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0130G-24	Linked DIME Sample ID
The fabricator/manufacturer/facility name	R J Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0027
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at R J Noble- Orange
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	50R003ARSPWEO	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2024-03-04-21

DIME Test ID: 2024-03-04-21-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2024-05-14

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 03/14/2024

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 960.3 grams

Mass of the pycnometer with water (B): 648.8 grams

Mass of the oven dried sample (before pycnometer) (A): 493.8 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.8 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.620

Bulk specific gravity (SSD Basis): 2.653

Apparent specific gravity: 2.709

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/14/2024 ✔