Summary for Test 2024-02-12-48-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 213457 DEA: 11430434 EFIS: 1118000197 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-8-12.9/14.6,14.9 |
| Award Date | 07/16/2022 |
| Closeout Date | 08/21/2025 |
| Work Description | HMA, STRUCTURAL BRIDGE, POLYESTER CONC OVERLAY, JPCP, & CONC BARRIER. |
| Location Description | SAN DIEGO COUNTY IN LA MESA AND EL CAJON FROM 0.1 MILE WEST OF GROSSMONT BOULEVARD OVERCROSSING TO WEST MAIN STREET OVERCROSSING AND AT MARSHALL AVENUE OVERHEAD |
| QA Service Level | 1 (Verified on 06/22/2018) |
Sample Information
| Sample Taken Date | 02/12/2024 | Sample Unique Key | 48 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/13/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | GILBERTO | Last name of sampler or witnessed by | GONZALEZ |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 17076245467 |
| Laboratory sample identification | 000036KBP | Linked DIME Sample ID | 000036KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4B00158 |
|---|---|---|---|
| Batch Number | AZ4B00158 | Mix number | AZ4B00158 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-02-12-48
DIME Test ID: 2024-02-12-48-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-03-19
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 02/16/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.486 in
Sample 1 Thickness: 0.27 in
Sample 1 Area: 0.1312 in^2
Sample 1 Ultimate Strength Actual: 392 lbs
Sample 1 percent elongation: 60.5 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.272 in
Sample 2 Area: 0.1322 in^2
Sample 2 Ultimate Strength Actual: 419 lbs
Sample 2 percent elongation: 66.8 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.486 in
Sample 3 Thickness: 0.27 in
Sample 3 Area: 0.1312 in^2
Sample 3 Ultimate Strength Actual: 379 lbs
Sample 3 percent elongation: 55.8 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.485 in
Sample 4 Thickness: 0.269 in
Sample 4 Area: 0.1305 in^2
Sample 4 Ultimate Strength Actual: 396 lbs
Sample 4 percent elongation: 62.7 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.485 in
Sample 5 Thickness: 0.263 in
Sample 5 Area: 0.1276 in^2
Sample 5 Ultimate Strength Actual: 376 lbs
Sample 5 percent elongation: 58.4 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.486 in
Sample 6 Thickness: 0.258 in
Sample 6 Area: 0.1254 in^2
Sample 6 Ultimate Strength Actual: 397 lbs
Sample 6 percent elongation: 66.1 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2987.8 psi
Sample 2 Ultimate strength : 3169.4 psi
Sample 3 Ultimate strength: 2888.7 psi
Sample 4 Ultimate strength: 3034.5 psi
Sample 5 Ultimate strength: 2946.7 psi
Sample 6 Ultimate strength : 3165.9 psi
Ultimate Strength Average: 3032 psi
Percent Elongation Average: 62 %
General comments (publicly viewable) (Max 1000 characters): Accepted based on vendor's results
Test was verified on 3/19/2024 ✔