Summary for Test 2023-08-28-96-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 995104 DEA: 023J7504 EFIS: 0222000080 |
---|---|
DIST-CO-RTE-PM | 02-LAS-139-32/38 |
Award Date | 03/06/2023 |
Closeout Date | Not set |
Work Description | Grasshopper CIR |
Location Description | Not set |
QA Service Level | 1 (Verified on 08/24/2023) |
Sample Information
Sample Taken Date | 08/28/2023 | Sample Unique Key | 96 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/28/2023 |
Sample type | Production Start-Up | A brief description of the sample | 2 bags of Combined Lime Treated 1/2-inch Virgin Aggregate from Cold Feed |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Andrea | Last name of sampler or witnessed by | Sloaterman |
Title of sampler | TET C | Telephone number of sampler | |
Laboratory sample identification | D79335A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | 858045 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008::Ward Lake Pit (Litchfield, CA) |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Cold Feed | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-08-28-96
DIME Test ID: 2023-08-28-96-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-03-15
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Sean McWithey
Date of test: 08/30/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2039 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
149.4 grams | 93 % | |||||
450.7 grams | 78 % | |||||
1119.6 grams | 45 % | |||||
491.1 grams | ||||||
193.6 grams | 27 % | |||||
303.0 grams | 17 % | |||||
365.3 grams | 12 % | |||||
403.5 grams | 8 % | |||||
427.3 grams | 6 % | |||||
440.9 grams | 4.6 % | |||||
441.9 grams |
General comments (publicly viewable) (Max 1000 characters): P¾″=100.%,
P½″=93%,
P⅜″=78%,
P№4=45%,
P№8=27%,
P№30=12%,
P№200=4.6%
Test was verified on 3/15/2024 ✔