Summary for Test 2017-05-08-12-13
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/08/2017 | Sample Unique Key | 12 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/15/2017 |
Sample type | Department Acceptance | A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts |
The quantity of what the sample constitutes | 6 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | K | Last name of sampler or witnessed by | Churchill |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | CMC Steel Nucor | Transportation Laboratory (TL) Number | C970923 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L02-025-17 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | PL16105348, 3068112 | Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | Bolt Specification | F1554 G55 HDG | |
Bolt Length(s) | 42" | Nut Specification | na |
Washer Specification | na | Finish | HDG |
Diameter/Size | 1.25", 1.75" | Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-05-08-12
DIME Test ID: 2017-05-08-12-13
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-05-29
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: Arnold
Date of test: 05/22/2017
UTM: 67KIP
Temperature: 71 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | PL16105348 | 0.4995 | 0.196 | 62292 | 83970 | 28.7 | Arnold | |
2 | PL16105348 | 0.493 | 0.1909 | 63014 | 84710 | 29.1 | Arnold | |
3 | 3068112 | 0.4945 | 0.1921 | 61371 | 87290 | 28.7 | Arnold | |
4 | 3068112 | 0.4955 | 0.1928 | 62110 | 87330 | 27.8 | Arnold |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 5/22/2017 ✔