DIME - Test Summary

Summary for Test 2024-02-02-9-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993815 DEA: 081C0814 EFIS: 0816000086
DIST-CO-RTE-PM	08-RIV-10-R60.7/R74.3
Award Date	03/28/2022
Closeout Date	Not set
Work Description	I-10 PAVEMENT REHABILITATION (SEGMENT 1) PROJECT
Location Description	Coachella
QA Service Level	1 (Verified on 05/03/2022)

Sample Taken Date	02/02/2024	Sample Unique Key	9
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/07/2024
Sample type	Verification	A brief description of the sample	JMF 1/2" HMA-A-SP R25 0.5% ML 5000
The quantity of what the sample constitutes	6 Bags Of Agg., 2 Bags Rap, 1 Bag Dust	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Rigoberto	Last name of sampler or witnessed by	Arroyo
Title of sampler		Telephone number of sampler
Laboratory sample identification	0110A-24	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Martin Marietta-Coachella	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0084
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Martin Marietta Coachella
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1 inch
The concrete mix design number	41217155	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2024-02-02-9

DIME Test ID: 2024-02-02-9-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2024-03-27

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 02/13/2024

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 967.9 grams

Mass of the pycnometer with water (B): 660.4 grams

Mass of the oven dried sample (before pycnometer) (A): 496.3 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 496.3 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.578

Bulk specific gravity (SSD Basis): 2.597

Apparent specific gravity: 2.629

Absorption: 0.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 3/27/2024 ✔