DIME - Test Summary

Summary for Test 2023-08-14-98-6

Test performed: AASHTO T304-11

Project Identifiers	Project ID: 994387 DEA: 023J7704 EFIS: 0222000082
DIST-CO-RTE-PM	02-SIS-96-97.2/103.0
Award Date	12/23/2022
Closeout Date	04/11/2024
Work Description	RHMA OVERLAY, REPLACE AC SURFACING, GUARDRAIL AND TRAFFIC STRIPE.
Location Description	SISKIYOU COUNTY ABOUT 21 MILES EAST OF HORSE CREEK FROM 4.2 MILES EAST OF EMPIRE CREEK BRIDGE TO 0.4 MILE WEST OF ROUTE 263
QA Service Level	1 (Verified on 03/28/2023)

Sample Taken Date	08/14/2023	Sample Unique Key	98
Date that the sample was received by the laboratory/organization performing the testing	08/14/2023	Sample type	Production Start-Up
A brief description of the sample	Combined Untreated 1/2-inch Type G Aggregate	The quantity of what the sample constitutes	Production Start-Up Evaluation
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Joe
Last name of sampler or witnessed by	Delgado	Title of sampler
Telephone number of sampler		Laboratory sample identification	D79324F
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Tullis — Northstate Asphalt (Redding, CA)
Transportation Laboratory (TL) Number	841613	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057:: Shasta Ranch Aggregates (Anderson, CA)
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Laboratory Batched from Sized Untreated Stockpile Samples
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-08-14-98

DIME Test ID: 2023-08-14-98-6

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)

Test Release Date: 2024-02-12

What test method is performed?: Method A

Input Type: Measured

Tester's full name: Josh Ferency

Date of test: 02/08/2024

Mass of measure: 190.2 grams

Bulk dry specific gravity: 2.55

Mass of sample and measure #1: 326.0 grams

Mass of sample and measure #2: 325.9 grams

Volume of cylinder: 100.2 mL

Mass of sample #1: 135.8 grams

Mass of sample #2: 135.7 grams

Uncompacted voids #1: 46.9 %

Uncompacted voids #2: 46.9 %

Average uncompacted voids: 46.9 %

General comments (publicly viewable) (Max 1000 characters): Us=46.8%

Test was verified on 2/12/2024 ✔